How to adjust the optical path of the fiber laser cutting machine

Fiber laser cutting machines are becoming more and more popular, playing an important role in manufacturing, machinery industry and other fields. Many times we see that the laser light emitted by the fiber laser cutting machine is straight, but it is not ruled out that in some cases the transmission direction of the laser needs to be changed to achieve the cutting effect. The optical path of the fiber laser cutting machine also has a great influence on the cutting accuracy. Therefore, it is very important to adjust the optical path. The following are the specific steps to adjust the light path:

1. Check whether the laser can hit the first mirror. (Method: Cover the first mirror with a plastic sheet, and press the TEST button to see the position of the laser dot.) If the laser cannot hit the first lens, adjust the position of the first lens.

2. Check whether the laser can hit the second and third mirrors. If not, adjust the screws M1, M2, and M3 behind the upper mirror.

3. Paste at least two layers of double-sided tape on the light entrance of the laser lens barrel, move the laser head to the upper right corner of the desktop, and press the TEST button on the control panel to perform the laser spot.

4. Move the laser head to the upper left corner and hit a laser point to see if it is in the same position as the hit point in the upper right corner. If they are not in the same position, adjust the M1, M2, and M3 screws of the second mirror. Let it hit the same point in the upper right corner.

5. Move the laser head to the lower left corner, observe whether the dot is at the same position as the upper right corner, and adjust the second mirror.

6. After repeated adjustments described in D and E above, the last three laser spots are hit in the same position.

7. Check whether the focus is in the center: Place a mirror vertically below the focusing lens, place the transparent plastic sheet under the lens barrel (ie hold it in your hand), press the TEST key and tap the laser once to check the laser Whether the light spot hits the center of the focusing lens. Be careful of laser burns when handling plastic plates. Do not put your hands on the vertical surface of the lens.

The , essentially perfected by assembly machine manufacturers, is one of the first home appliance to be widely distributed.

Helping our customers manage document workflow and increase efficiency through best-in-class INFO CENTER and services. Fostering the growth and development of our employees.

Latest technology and manufacturing equipment has improved the quality of INFO CENTER.

YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. have found that nurturing relationships with clients by welcoming them to our factory can be valuable to all parties.

YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. constantly discovers the demands of global market for developing a wide range of products applied in different use.