loading

E-mail:Machine@chinaventech.com              Expert for pre insulated duct CNC cutting machine.

How should the gantry CNC cutting machine be maintained?

   In recent years, the gantry CNC cutting machine has won the favor and support of many manufacturers, and is widely used in various fields. In the first half of 2020, we also received a large number of orders for gantry CNC cutting machines, and after-sales experience has solved these factors. Will customers encounter minor faults immediately after purchasing the equipment? Most of the reasons are poor maintenance of the equipment. The daily sustainability and sustainability of the gantry CNC cutting machine cannot be ignored. Convenient equipment maintenance can reduce the number of obstacles when using the equipment. It can extend the service life of the equipment and bring many commercial benefits.

   First of all, the operator needs to have specific skills, and to a certain extent understand the mechanism, working principle, performance characteristics and various aspects of the CNC cutting machine gantry, and use it Practice before.

   Check the wiring and gas problems before using the instrument. If a leak is detected, the power supply will not change.

   Make sure that there are no foreign objects near the machine to prevent collision.

   needs to perform a series of transmission operations to prevent unnecessary data loss.

  The rails and feed should not be cleaned with dirty water or dirt. If it is contaminated, use clean lint to clean and remove excess cotton soaked in oil.

When programming, the operator needs to program the program strictly in accordance with the programming format provided by the gantry CNC cutting machine, and the wrong program will send an alarm to the system.

   Note that the conductive block has good conductivity and friction between the beds. The platform cushion should be separated from the bed. The stepper motor needs to be free. The stepper motor ensures that there is no sewage.

Maintenance of   radio system

  Dust and debris on the driveway are often used to prevent airway aging.

   You should always check the gas circuit system in order to deal with improperly used fuel and components in time to ensure smooth air flow.

   Anti-tempering device is an important part to ensure safety. It is strictly forbidden to disassemble the anti-backfire device in accordance with the requirements of the safety department. Therefore, the anti-flashback device uses extended air resistance to prevent unnecessary or leaking airflow.

   When the operator starts to work, be sure to turn off all power and air lines, and stop the gantry CNC cutting machine at a specific position.

If you are looking for convenient, affordable , VENTECH brings plethora of options to suit your requirements and budget both. Check Ventech Automatic Machine for more details.

Interested in the that create such effect? Come to Ventech Automatic Machine to see some items.

YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. must adopts new technology and internal procedures to increase responsiveness and mitigate costs going forward.

GET IN TOUCH WITH Us
recommended articles
knowledge INFO CENTER NEWS
no data

Contact Us

Tel : +86 757 29200196
Mobile : +86-189 27789653
E-mail : machine@chinaventech.com
Address : No. 3, Hongcha Road, Yinghong
Industrial Zone, Yingde, 513042, Qingyuan, Guangdong, ChinaYPE 2019

Better Touch Better Business

Contact Sales at  VENTECH.

Air Units

Call Us

+86  18927789653

Copyright © 2025 Yingde Ventech Intelligent Equipment Co., Ltd. | Sitemap
Customer service
detect