loading

E-mail:Machine@chinaventech.com              Expert for pre insulated duct CNC cutting machine.

How much does the metal laser cutting machine cost for one hour

The metal laser cutting machine uses an invisible beam to replace the traditional mechanical knife. It has high precision, fast cutting, not limited to cutting pictures, active typesetting, saving materials, smooth cuts, and low processing costs. Gradually improve or replace the traditional metal cutting process equipment. The mechanical part of the laser cutter head has no contact with the operation, and will not cause scratches on the surface of the operation during the operation; the laser cutting speed is fast, the incision is lubricated and flat, and generally does not need subsequent processing; the heat-affected zone of the cutting is small, the plate deformation is small, and the slit is cut. Narrow (0.1mm~0.3mm); the cut has no mechanical stress, no shearing burr; high processing accuracy, good repeatability, and does not damage the appearance of the material; CNC programming, can process any plan, and can cut the entire board with a large format Open, no need to open the mold, economical and time-saving.

1. Laser generator (depending on the power of the generator, generally the 2000W generator is about 30KVA. The 4000W generator is about 50KVA, the greater the power, the greater the power consumption).

2. The mechanical part (including the power consumption of the servo system, NC, and various electrical components, which depends on the power consumption of the motor size designed and used by the cutting manufacturer) generally requires more than 10KVA.

3. Water cooler (used to cool the light path and the generator, according to the size of the generator power, the water cooling capacity should also be matched. Generally, it should be more than 20KVA).

4. Air compressor (the power of the air compressor is different from the manufacturer's requirements, at least 5KVA or more).

5. Some manufacturers have additional dust removal devices. In summary, for example, the maximum power consumption of 2000W incision laser cutting in one hour is: 65KVA, about 50 degrees. Of course, the laser cutting machine cannot always run at full power. Generally, it is 30-40 kWh at a discount of 30-40 kWh. According to the electricity cost of 1 yuan/kWh, the power consumption of a 2000W metal laser cutting machine is one. It costs 30-40 yuan per hour.

The increasing consumption demand in key segments such as punching machine manufacturer, powder coating machine price and powder coating machine for sale have been driving the sales of and its derivatives worldwide.

For decades, YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. has searched for and found a number of secrets to help customers through out the world to achieve assembly machine manufacturers by providing useful and efficient solutions. Go to Ventech Automatic Machine to learn about some of those secrets.

A wholesaler should have many powder coating system for sale based products that could help you if you have a punching machine manufacturer problem. It is better to treat the problem early rather than have to deal with it later. YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. is your best choice.

YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. deems INFO CENTER as evolutionary rather than revolutionary. We've always had these 'social commerce' marketplaces in some form.

GET IN TOUCH WITH Us
recommended articles
knowledge INFO CENTER NEWS
no data

Contact Us

Tel : +86 757 29200196
Mobile : +86-189 27789653
E-mail : machine@chinaventech.com
Address : No. 3, Hongcha Road, Yinghong
Industrial Zone, Yingde, 513042, Qingyuan, Guangdong, ChinaYPE 2019

Better Touch Better Business

Contact Sales at  VENTECH.

Air Units

Call Us

+86  18927789653

Copyright © 2025 Yingde Ventech Intelligent Equipment Co., Ltd. | Sitemap
Customer service
detect