loading

E-mail:Machine@chinaventech.com              Expert for pre insulated duct CNC cutting machine.

How does the layout process of the CNC laser cutting machine work? These six points are very important

  Before processing, the CNC laser cutting machine needs typesetting software with many years of experience for typesetting. The finished product after typesetting can be imported into the cutting machine for generation, and then it can be processed directly. The advantages of its use are obvious. Therefore, the process of typesetting directly affects the cutting results of the cutting machine. Next, I will give you a specific introduction.

  1. Corner melting

   When the corner of the thin steel plate decelerates, the laser will melt the corner due to overheating.

Generate a small radius at the corners, maintain high-speed laser cutting, avoid the phenomenon of overheating and melting of the steel plate when cutting the corners, obtain good cutting quality, reduce cutting time, and improve productivity.

  2. Cutting edge

   Two or more parts share an edge to form a combination. Large regular patterns try to share edges. Ordinary blade cutting can greatly shorten the cutting time and save raw materials.

  3. Residue processing

   After cutting the part, it is necessary to remove the skeleton-like residue on the table of the CNC laser cutting machine as soon as possible to make subsequent cutting operations easier.

In the laser cutting equipment without automatic discharge device, the skeleton-like residue can be cut into small pieces and quickly removed. It can avoid personal injury caused by sharp edges of operators.

  4. The distance between each part

   Generally speaking, when cutting a thick plate and a hot plate, the distance between the workpieces should be large. The heat of the thick plate is greatly affected by the heat. When cutting corners and small graphics, it is easy to burn the edges and affect the cutting quality.

  5. Wire setting

   In the process of cutting thick plates, in order to make gap joints and prevent burns on the head and tail, turnouts are often drawn at both ends of the cut . The front line and the tail line are the workpiece itself.

It's useless, please put it outside the scope of the workpiece, and be careful not to put the wire in sharp corners and other places that are not prone to heat. The connection between the wire and the gap should be transmitted in a circular arc as much as possible.

  6. Component conflict

   In order to improve production efficiency to a certain extent, many laser cutting equipment run continuously for 24 hours and use unmanned automatic loading and unloading devices. Parts, causing damage to the cutting head and interruption of production, causing great losses.

   The above is the specific introduction of the layout process of the CNC laser cutting machine. There are many aspects that need to be clear in the layout processing, and some details will affect the quality of the workpiece. , So you need to pay extra attention. The distance between each part should also be clearly defined, otherwise it is easy to burn the edges and affect the cutting quality.

Whether it's automation or artificial intelligence, the rapid convergence of technology and business often determines INFO CENTER’s competitiveness.

YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. will expand our presence in direct selling and lead the reinvention of the channel, offering an entrepreneurial opportunity that delivers superior earnings, recognition, service and support, making it easy and rewarding to be affiliated with VENTECH and elevating the image of our industry.

The stability of the system, controllability of the powder coating machine price process, and mobility of the machines provide with a flexible and reliable INFO CENTER system.

YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. have found that nurturing relationships with clients by welcoming them to our factory can be valuable to all parties.

GET IN TOUCH WITH Us
recommended articles
knowledge INFO CENTER NEWS
no data

Contact Us

Tel : +86 757 29200196
Mobile : +86-189 27789653
E-mail : machine@chinaventech.com
Address : No. 3, Hongcha Road, Yinghong
Industrial Zone, Yingde, 513042, Qingyuan, Guangdong, ChinaYPE 2019

Better Touch Better Business

Contact Sales at  VENTECH.

Air Units

Call Us

+86  18927789653

Copyright © 2025 Yingde Ventech Intelligent Equipment Co., Ltd. | Sitemap
Customer service
detect