loading

E-mail:Machine@chinaventech.com              Expert for pre insulated duct CNC cutting machine.

Gantry CNC cutting machine: long-term development is really important

   Gantry CNC cutting machine has the advantages of high efficiency, good quality and low cost. It is favored by many domestic machining industries and countries all over the world. It has not been long for China to introduce CNC cutting technology and related equipment. After more than ten years of digestion and absorption, a number of large-scale and strong domestic manufacturers have begun to introduce CNC cutting machine brands with completely independent intellectual property rights, and have been recognized by the domestic and foreign markets.

  The gantry CNC cutting machine manufacturing industry has begun to have a national competitive advantage. The number of CNC machine tools in China has far exceeded that of other developing countries. Therefore, opening up the international market is the key to long-term development. Any hot spots will delay the injection cycle of the injection molded part, and the wire cutting machine will be used to achieve the warpage and indentation of the disassembled injection molded part.

  Hand-held cutting machines may also damage the surface quality of the parts. The internal channel can be designed closer to the cooling surface of the mold, with smooth corners, faster speed flow, flame cutting machines and extensive industrialization should improve the heat transfer efficiency of the coolant. The high-power plasma cutting using water jet technology makes the cutting quality close to the lower limit of laser cutting (0.2 mm). Due to the high price of laser cutting machines, it is currently only suitable for cutting thin plates (usually thick plates have a longer perforation time), so the cutting accuracy of accurate plasma cutting machines can reach the lower limit of laser cutting.

  The cutting surface quality is similar, but the cutting cost is much lower than laser cutting. Laser cutting is about 1/3 of laser cutting, and the maximum cutting thickness can reach 12mm. Therefore, replacing the expensive laser cutting machine with a gantry CNC cutting machine is beneficial to cutting the neutralized sheet economically, at high speed and with high precision. Letting the fan produce a lot of noise is also not conducive to exhaust and deodorization. When the suction power of the fan is insufficient and the exhaust smoke is not smooth, the power should be turned off first, the air inlet pipe and the air outlet pipe on the fan should be removed, and the internal dust should be removed.

Nowadays, the adoption of INFO CENTER in assembly machine manufacturers industry is quite common.

If you have any issues with your INFO CENTER, you will have to call the experts at Ventech Automatic Machine to assist you. Any of your enquiry is warmly welcomed.

Digging into our roots and acknowledging out heritage can be fruitful on both a high-quality and professional level of INFO CENTER.

YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. constantly discovers the demands of global market for developing a wide range of products applied in different use.

GET IN TOUCH WITH Us
recommended articles
knowledge INFO CENTER NEWS
no data

Contact Us

Tel : +86 757 29200196
Mobile : +86-189 27789653
E-mail : machine@chinaventech.com
Address : No. 3, Hongcha Road, Yinghong
Industrial Zone, Yingde, 513042, Qingyuan, Guangdong, ChinaYPE 2019

Better Touch Better Business

Contact Sales at  VENTECH.

Air Units

Call Us

+86  18927789653

Copyright © 2025 Yingde Ventech Intelligent Equipment Co., Ltd. | Sitemap
Customer service
detect