Fiber laser cutting machine

There are many problems with the timing of fiber laser cutting. However, if the fiber laser cutting machine is found to be defective, we should use reasonable methods to repair the fiber laser cutting machine in time. However, the reasons for the defects of the fiber laser cutting machine are different, so we need to adopt different treatment methods.

　　 Next, let the editor introduce for us, what are the ways to repair the defects of the fiber laser cutting machine:

　　 1. The machine does not work: check whether the power cord switch of the fiber laser cutting machine is open; check whether the power cord is connected to the power plug and whether it is loose; check whether the panel power supply is open.

　　 2. The pump is not working normally: Check whether the circulation system of the fiber laser cutting machine is blocked; check the liquid level of the entire system to ensure that the pump can accept liquid, and check whether the pump motor can work.

　　 3. No refrigeration or lack of refrigeration: check whether the voltage is too low or too high; check whether too much heat is transferred to the cooling liquid of the fiber laser cutting machine, because it will exceed the cooling capacity of the refrigeration system.

　　 Fourth, lack of pump suction: check whether the connection of the fiber laser cutting machine is restricted; whether the voltage is too low or the fluid viscosity is too high.

　　 When we protect the fiber laser cutting machine, we must adopt the correct method. If the protection method is not correct, it will cause damage to the fiber laser. If we find that the fiber laser cutting machine cannot be dealt with, we can contact the manufacturer to deal with it.

Getting doesn't have to be expensive, time-consuming, or difficult. It all comes down to the right method and a punching machine manufacturer INFO CENTER in place.

For decades, YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. has searched for and found a number of secrets to help customers through out the world to achieve assembly machine manufacturers by providing useful and efficient solutions. Go to Ventech Automatic Machine to learn about some of those secrets.

Looking for Manufacturers in China? Then YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. is the right choice. we are a well known powder coating machine price INFO CENTER Manufacturers and suppliers from China.

Time is one of the biggest challenges cited by manufacturing INFO CENTER.

Like anything else in powder coating system for sale, there are a variety of choices and types to choose from, and each of them will affect your budget in some form. YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. offers a range of quality at competitive prices.