E-mail:Machine@chinaventech.com Expert for pre insulated duct CNC cutting machine.
Speaking of the gantry cutting machine, I believe you will not be unfamiliar with it. In recent years, the appearance of the gantry cutting machine has improved the cutting efficiency of most cutting jobs, and has made the application scope of the gantry cutting machine wider and wider, but When you use the gantry cutting machine, what should you do if you encounter a power failure? And what are the cutting requirements of the laser cutting machine? Next, let us understand the details of the gantry CNC cutting machine in detail Information.
Gantry CNC cutting machine power failure treatment method:
In case of power failure, please do not move the machine or the cutting disc to avoid displacement. Once the displacement occurs, it needs to be repositioned, which will cause a certain deviation. After the power is restored, it runs in the normal startup mode. After the gantry cutting machine is started, enter, press any key to enter the next cutting interface, then press F7 to move the cart manually, and then continue to press F7 to shut down and restore. At this time, press the Enter key and start, so that the cutting gun will lower and start cutting.
In addition, some customers also use some local methods, that is, reselect the cutting mode, or start from the origin according to the cutting mode, simulate walking to the breakpoint position, then switch the mode to the current state, and then start continuous Cutting. Although this method is feasible, it is not as simple and accurate as the above operation.
Gantry CNC cutting machine cutting requirements:
1. Prepare the plates to be cut, the deformation of carbon steel, stainless steel and aluminum should be as small as possible , The thickness should not exceed the allowable range of the cutting table. Select the corresponding wearing parts according to the thickness of the plate and load them into the corresponding cutting torch.
2. Determine a single cutting torch, synchronous or symmetrical cutting, select the corresponding button on the operation panel, press the plasma button on the operation panel to make the internal light on, and test the pre-flow and cutting according to the requirements of the cutting table Flow, adjust the pre-flow and cutting flow, manually adjust the initial height of the cutting torch to the height required by the cutting table; set the arc voltage and current according to the cutting table.
3. Manually set the cutting torch to the starting position; select the cutting program on the CNC system of the gantry CNC cutting machine to complete the work configuration: cutting speed, slot compensation, etc. Press the 'Start' button to start cutting, and deal with different problems in the cutting according to the operating instructions until the cutting is completed.
YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. has a professional team of engineers and technology professionals.
We would like to offer our comprehensive service to our customers who interested in INFO CENTER.
What YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. discovered was that innovation occurs when business models match up with one or more of the INFO CENTER where technological advances overlap with market needs, thus resulting in growth and transformation.
Quick Links
Products
Contact Us