Do you know the installation process of the gantry CNC cutting machine?

　　 Speaking of 'gantry cutting machineIt has the advantages of higher efficiency and longer operating time. With the wide application of gantry cutting machines in recent years, the cutting efficiency of cutting operations has been greatly improved. Moreover, according to the cutting machine market in recent years, we can also It can be seen that compared with other cutting machines, the sales volume of the gantry cutting machine has a very large growth rate. Following this article, let us take a detailed understanding of the use process of the gantry CNC cutting machine.

　　 Before using the gantry CNC cutting machine, we need to put a piece of iron plate to be cut on the rack. It should be noted that the feeding rack plate needs a special level, and the iron plates placed should be parallel, so we can find the parallelism according to the trajectory of the gantry cutting machine.

　　Before working, we need to check the use of the gantry cutting machine, whether there is any problem, and make sure there is no problem before starting the machine to avoid accidents. Then, before starting the machine for normal use, check the walking track to ensure that there are no obstacles. If it is a dual-purpose cutting machine, it is divided into a plasma cutting machine and a flame cutting machine. We have to decide which cutting method to use according to the thickness of the iron plate to be cut. Both have their own advantages, so we can choose by ourselves.

　　 such as opening the device. Open the numerical control system, select graphics management, find the graphics we need to cut, and then set the size to be cut and confirm. If the graphics we need to cut are not available in the system, we need to use drawing software to draw the pictures, and then use nesting software to nest. When nesting, we can adjust the cutting order. The function specified above is to set the size according to our own iron plate. After arranging the graphics, you can save them, put them into our u disk, and then insert the u disk into the CNC system for reading. When everything is ready, press the start button on the laser cutting machine to start cutting.

　　 Regarding the use process of the gantry CNC cutting machine, do you know it? With the wide application of the laser cutting machine in recent years, everyone must buy a gantry cutting machine Choose a manufacturer with many years of experience to purchase, and pay more attention to the maintenance of the gantry cutting machine after purchasing the gantry cutting machine.

YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD.'s products comply fully with all compatible producing regulations.

Want to learn more about powder coating machine for sale INFO CENTER? Check out Ventech Automatic Machine.

With this competency, YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. provide high technology and assist customers to create added value and contribute to the development of producing INFO CENTER.