Daily maintenance of toy laser cutting machine

Laser cutting machines for toys are widely used in clothing appliqués, weaving labels, trademark cutting, clothing accessories engraving, perforating, and trimming; leather perforating, lofting, and cutting; organic glass, plastic, PVC, and paper , Wood and bamboo cutting; wood and bamboo, ceramics, granite, and shadow carving industries.

(1) Lens cleaning: Bend the lens cleaning paper into several folds, soak it with a few drops of analytical pure acetone; gently wipe the surface of the lens with the soaked lens paper, and be careful not to press the lens with your fingers; repeat several times , Until the surface of the lens is clean and there are no dirt and remaining marks on the mirror surface; blow dry with dry air; if necessary, roll the lens paper moistened with a few drops of acetone into a rod, and gently scrub the surface of the lens to remove heavy dirt drops .

(2) The laser engraving machine manufacturer introduces the cleaning of the mirror lens: remove the lens from the frame; put the lens paper on the mirror surface with the mirror face up; put a few drops of acetone on the lens paper, and gently pull the lens Roll the paper over the mirror surface; repeat the above process until the mirror surface is clean and there is no dirt and residue left on the mirror surface; then put the lens into the lens holder.

Most optical components such as lenses and prisms are made of optical glass. Their optical surfaces have been carefully ground and polished, and some of them are coated with one or more layers of film. The optical properties of these components or their materials (Such as refractive index, reflectivity, transmittance, etc.) have certain requirements, and their mechanical and chemical properties may be poor. If used and maintained improperly, it will reduce the optical performance or even damage the scrap, which is a common cause of damage There are broken, abraded, scratched, stained, mildewed, corroded, etc.