loading

E-mail:Machine@chinaventech.com              Expert for pre insulated duct CNC cutting machine.

Briefly describe the correct cleaning steps of the heat dissipation system of the metal laser cutting machine

The cleaning of the heat dissipation system of the metal laser cutting machine is a part that cannot be ignored in the use process. Many people do not pay much attention to this work or even understand it. In fact, the cleaning of the heat dissipation system has a great impact on the safety and smooth operation of the equipment. Large, and the cleaning of our equipment does not mean that it can be washed with water or wiped with a wet cloth, but there are many requirements.

  The heat dissipation system of the laser cutting machine is the main heat dissipation channel of the cutting torch. In the conventional configuration, it can be divided into air-cooled heat dissipation and water-cooled heat dissipation. Because the working principle of the laser cutting machine is to use the high temperature of the plasma arc column To melt the material to be cut, in the general cutting process, it is necessary to equip a special air compressor as an auxiliary to realize the effect of blowing away the slag of the material to form a slit during the cutting process. The following editor will share with you the cleaning method of the heat dissipation system of the metal laser cutting machine.

   1. Unscrew the screw, remove the air filter, and get ready for cleaning;

  2. Monitor the current and voltage of the power grid of the CNC system on time to ensure that the fluctuation area of u200bu200bthe current and voltage of the power grid is within the allowable rated area;

  3. Gently shake the removed filter device, while at the same time, use air compression to blow off the dust in the air filter from the inside to the outside;

  4. Check and replace DC motor brushes on time;

  5. If the dust on the filter device is too thick and cannot be removed by air compression, you can choose to clean it gently with a neutral detergent and place it in a cool place to dry;

   6. Disassemble and replace the storage battery of the metal laser cutting machine on time. Under normal circumstances, even if the battery does not fail, the battery should be removed and replaced once a year to ensure that the system can work normally.

YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. have now decided to extend our company in other countries.

Crazy about products? YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. is the place you must shop at, do visit Ventech Automatic Machine to check out our latest collections!

To strengthen and grow our leadership position by providing INFO CENTER across a range of market segments, including powder coating machine for sale, and high-performance servers.

YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. clearly knows that people often launch something and love it and want to go on and on about it, but that's too normal and mediocre. There are lots of other competing products, so we need to keep it very, very unique.

powder coating system for sale has become a serious problem for an increasing number of people around the world, that's why highly effective are developed by YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD..

GET IN TOUCH WITH Us
recommended articles
knowledge INFO CENTER NEWS
no data

Contact Us

Tel : +86 757 29200196
Mobile : +86-189 27789653
E-mail : machine@chinaventech.com
Address : No. 3, Hongcha Road, Yinghong
Industrial Zone, Yingde, 513042, Qingyuan, Guangdong, ChinaYPE 2019

Better Touch Better Business

Contact Sales at  VENTECH.

Air Units

Call Us

+86  18927789653

Copyright © 2025 Yingde Ventech Intelligent Equipment Co., Ltd. | Sitemap
Customer service
detect