E-mail:Machine@chinaventech.com Expert for pre insulated duct CNC cutting machine.
Compared with traditional plate cutting methods, laser cutting machines have obvious advantages. It has fast cutting speed and high production efficiency; good cutting quality, narrow cutting seam; good material adaptability, no tool wear; no matter simple or complex parts, it can be cut with laser precision and rapid forming at one time; high degree of automation, simple operation, The labor intensity is low and there is no pollution; the production cost is low and the economic benefits are good; the effective life cycle of the technology is long.
Compared with conventional processing methods, laser cutting also has obvious advantages. In thermal cutting methods, neither oxygen combustible (such as acetylene) cutting nor plasma cutting can concentrate energy on a very small area like a laser beam, resulting in wide cuts, large heat-affected zones and more obvious workpiece deformation. Oxygen-flammable cutting equipment is a very flexible cutting tool with small equipment and low investment. However, due to its large heat-affected zone and low cutting speed, the incision is severely jagged and undulating. Therefore, it is rarely selected for cutting materials with a thickness of less than 20mm and requiring precise dimensions. The speed of plasma cutting is similar to that of laser cutting, which is significantly higher than that of acetylene flame cutting. But its cutting energy is low, the top of the cutting edge is rounded, and the cutting edge is obviously wavy. During operation, it is also necessary to prevent the damage to the operator caused by the ultraviolet radiation generated by the arc. However, lasers can cut non-metals, while other thermal cutting methods cannot. In the mechanical stamping process, the die-punching method is used to produce large quantities of parts, which has the advantages of low parts cost and short production cycle. However, this method is difficult to adapt to changes in design, and the equipment is dedicated, the manufacturing cycle is long, and the cost is high.
For small and medium-sized enterprises, the specialty of laser cutting will be fully demonstrated. The laser cutting machine facilitates the close arrangement and cutting of the workpieces, which saves more material than the die punch which needs to reserve a large amount of material around each workpiece. For large and complex parts that need to be punched in sections, punching is required, which results in many small shell-shaped cutting edges on the cutting edge, resulting in a large amount of leftover material. Its cutting speed is much slower than laser cutting. Moreover, as a flexible non-contact, profiling cutting tool, the laser can cut in any direction from any point of the material. This is a point of excitement for sawing. EDM or wire cutting is used for fine processing of hard materials. Although the cut is relatively flat, the cutting speed is several orders of magnitude slower than laser cutting. Although water cutting can cut many non-metallic materials, the operating cost is relatively high.
The importance of INFO CENTER has increased as powder coating machine price have become a must in our daily life.
Hard work and performance is rewarded through bonuses and commissions. Job satisfaction is very important for employees and owners, YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. will create a work environment that is enjoyable and profitable for all.
To stay in contact for latest review of INFO CENTER punching machine manufacturer across the globe and find out quality products, just go to Ventech Automatic Machine.
Quick Links
Products
Contact Us